How to D8112 Communications to Central Station

Issue

The D8112 is communicating with the Central Station but they do not receive any Signals.

Solution

Check what format the panel is sending the Central Station via either a D5200 or RPS. In the program go to MAIN ->PRIMARY CENTRAL STATION->CS. The available selections for this prompt is 0 – 7. If this prompt is programmed as a 7 the panel is communicating in Modem II format (D8112G2 Only) and this would use a 4 digit account number. If it is a 6 the panel is communicating in BFSK format which uses a 3 digit account number. If it is 0 – 5 the panel is communicating in 3 X 1 Pulse format and also uses a 3 digit account number. In any cause where the 3 digit account is used it must be lead with a zero when it is typed in. (0XXX) the X’s representing the account number.

Part numbers D8112, D8112E, D8112E1, D8112G, D8112G1, D8112G2