AEC1.0 – Elevator Control
Install AEC – 8I8O – EXT board
- Follow directions in the AEC Installation Manual to attach and properly address the AEC-8I8O-EXT board.
Program the AEC controller through the Access Easy web interface
- Connect and log into the configuration web page for your panel.
This section will be used to name the relay outputs on the AEC-8I8O-EXT.
- Select Panel Admin.
- Select Output Setup under the Panel Admin heading.
- Click on the first output you will be using on your output board.
Outputs 1 to 8 will be on the output board addressed as number one by the on-board jumpers. Outputs 9 16 on output board number 2, etc.
- When the Output Point Setup window opens, delete the default description and enter in a new description for that output. We recommend using the name or number of the floor that will be controlled by that output for ease of programming.
- Click on the save icon. Then click on the clipboard icon.
- Continue this procedure for all outputs that you will be using.
- Card Readers
This section will allow you to select a reader as an elevator reader and link it to the appropriate outputs.
- Select Card readers under Card Access Admin.
- Click on the reader that will be used for elevator control.
- In the Reader Function section, select Elevator Reader and click on the green arrow.
- Under Scheduling Options, select the appropriate scheduling scheme for this reader and then click the green arrow.
- Associating a schedule with a reader will make all of the floors associated with the reader public (not requiring card access) during the scheduled time.
- If you want to make individual floors public during certain times, this can be done by going back to the Output Setup and adjusting the individual output’s Output Schedule.
- In the Floor Output Settings page, enter the appropriate amount of time in the Floor Relay Enable Timer. This setting will determine how long the relay with stay active after a card read.
- To associate the floor number with the appropriate relay, select your floor from the Floor drop down box, select your output in the Output dropdown box, and click on the “+” button.
- This will populate the window above.
- Repeat this step for each floor and output that will be controlled by this reader.
- Access Groups
In this section, you will give an access level permission to access assigned floors.
- Select Access Groups under the Card Database section.
- Click on the access group that you would like to modify for elevator control.
- First, provide a description for this access group in the text field at the top.
- In the Access Group window, put a check in the box next to the elevator reader.
- Next, select the appropriate schedule for when you would like personnel in that access group to be able to access that elevator reader.
- After you select your schedule, click on "Floor List" on the right.
- When your Floor List window opens, put a check mark by all of the floors that this access group will be able to access.
- Card Assignment
This section will allow you to assign an elevator access group to a card holder.
- Select Card Assignment under the Card Database section.
- Click on the user number you would like to modify for elevator control.
- In either Access Group A or Access Group B, assign the Card Holder an access group that includes access to the desired floors.
- Test the System
