How to calibrate the D1265 keypad display.

When the D1265 display is not centered causing some of the buttons to become outside the viewing area, calibrating the keypad may correct the problem.

Steps to calibrate the D1265:

1. Power down the D1265 by removing the keypad from the mounting plate.
2. Reconnect the keypad back in place.
3. Press an hold the screen as the D1265 powers up until the beeping stops and release your finger.  
4. On the menu that displays, select Calibrate.
5. Press the ( + ) in each corner on the screen.
6. Press SAVE and EXIT.
7. Power down the D1265 by removing the keypad from the mounting plate.
8. Reconnect the keypad back in place.

• When the keypad comes back up, the display should be centered.