Article status
This procedure takes in average ~ 5 min to complete
Question
Is Blurring Possible on the DINION 7100i IR Camera?
Answer
Yes, the blurring feature is available on the DINION 7100i IR camera, introduced in firmware version 9.10.0192, as noted in the CPP14 Release Notes (page 17). To enable this feature, please upgrade the camera to firmware version 9.10.0192 or later.
Once the DINION 7100i IR camera has been updated to firmware version 9.10.0192 or later, the blurring option can be set from web browser by following these steps:
- Go to Configuration
- Expand the Camera menu
- Select Installer Menu
- Choose On for the Blurring option
Additionally, after completing the above steps, it is necessary to select the Blur Pattern from Privacy Mask in the Installer Menu and click the Set button.
ADVANCED section
Please contact CTS / SG or GK team to view this section from draft space, if necessary
Information below is for CTS, SG, GK reference and must be kept internal only.
If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!
This section will not be published externally and / or automatically downloaded in the PDF file!
