When adding a new sensor the following error message displayed.
The cause of the error is combination of group address and the text length of the group label as defined in RPS as shown below.
The group address is longer than 3 digits and label text length is 31 characters long.
There are two solutions:
- Change the group address to 3 digits or less than the label text length can be 31 characters long.
- If is not possible to change the group address to less than 3 digits then the label text length needs to be 30 characters or less.
| Scroll ignore |
|---|
advancedINLINEgreenINLINEMANDATORY --> after finishing this article, if you wrote advanced content in this section , you must to manually add the "advanced" label This action is required to indicate that this article contains ADVANCED instructions for CTS/ SG or GK.
DO NOT CHANGE ANYTHING IN THIS SECTION!
advanced section
Please contact CTS / SG or GK team to view this section from draft space, if necessaryadINLINEIMPORTANT! --> the content itself from here will be not displayed. The content from here will be displayed only when the "ad" label will be set after article creation. Only CTS/ SG or GK are allowed to use "ad" label.
PLEASE do not set "ad" label from beginning. Use it only when you need this info and REMOVE the "ad" label when finished!
Information below is for CTS, SG, GK reference and must be kept internal only- .
If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!
DO NOT CHANGE ANYTHING IN THIS SECTION!
This section will not be published externally and / or automatically downloaded in the PDF file!Type your text/ advanced information here
Please write here the statement/answer/explanation
Add pictures, if necessary
