Step-by-step guide
The FPA-1000 panels offer an 80-character (4 lines X 20 characters) wide viewing-angle LCD
Display.
Line 1 Displays two parts –
Part 1 -The Event Type (Fire Alarm, Trouble, Supervisory ...)
Part 2 - The numerical event description made up of 3 parts.
a.)The first two digits tell us the panel number (Panel ID)
b.) The Next digit is the Circuit Address (0 = Web Page, 1 = SCL1, 2 = SLC2, 3 = Main Board (MB), 4 = Option Bus (OB).
c.) The last four digits equal the Address Assignment. Below see Main Board Address Assignment chart below for (3) Main Board (MB) failure address codes.
Line 2 Displays three parts –
Part 1 – Date
Part 2 – Time
Part 3 - Number of events read as event xxx of xxx events.
Example 002/009 is displaying Event 2 of 9 total events.
Line 3 Displays two parts –
Part 1- Displays the Device Type
Part 2 - Circuit Status.
Line 4 Displays the installer programed point text for the device address.
See diagram below.
Main Board (MB) Address Assignment
Address | Device | Comment |
1 | Relay 1 Bypass | Relay 1 Bypass |
2 | 2Relay 2 Bypass | 2Relay 2 Bypass |
3 | Relay 3 Bypass | Relay 3 Bypass |
4 | NAC1 Control Open/Short/Overcurrent | NAC1 Control Open/Short/Overcurrent |
7 | NAC2 Control Open/Short/Overcurrent | NAC2 Control Open/Short/Overcurrent |
17 | AC Power | No or Low AC |
18 | AUX Power | No or Low AUX |
19 | Earth Detector | Panel Grounding |
20 | Battery Charger Failure | Battery Charger Failure |
21 | Battery Failure | Battery Failure |
26 | IP reporting path 1 Disconnect | IP reporting path 1 Disconnect |
27 | IP reporting path 2 Disconnect | IP reporting path 2 Disconnect |
28 | Communication to primary account Failure | Communication to primary account Failure |
29 | Communication to secondary account Failure | Communication to secondary account Failure |
32 | City Tie 1 Open/Short/Activated/Activated Fail | City Tie 1 Open/Short/Activated/Activated Fail |
33 | City Tie 2 Open/Short/Activated/Activated Fail | City Tie 2 Open/Short/Activated/Activated Fail |
34 | City Tie Board Missing | City Tie Board Missing |
35 | Mainboard Total NAC Overcurrent | Mainboard Total NAC Overcurrent |
36 | Network Interface Card (NIC) Missing | Network Interface Card (NIC) Missing |
37 | PORT 1 NIC Port 1 Disconnect | Port 1 Disconnect |
38 | PORT 2 NIC Port 2 Disconnect | Port 2 Disconnect |
39 | PORT 3 NIC Port 3 Disconnect | Port 3 Disconnect |
46 | Wiring Open | Open loop of topology |
47 | New Panel | New panel (according to panel list) |
48 | Panel Reused ID | Panel ID used more than once (Duplicate Panel ID) |
49 | Group Configuration | Group configuration conflict |
50 | Global Configuration | Global configuration conflict |
51 | Control Conflict | Control command conflict |
52 | Panel Missing | Missing panel (according to panel list) |
53 | Out of Sync | Indicates events on a panel or panels are not fully synchronized with event on another panel or panels |
| Scroll only | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference. This is |