Page Comparison

This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios. Depending on the issue, this article lists the required logging to start the initial troubleshooting process.

General Information

•  Contact name (person) delivery 
•  Contact number (tel.) delivery 
•  Contact e-mail delivery 
•  Delivery location company name (co location) 
•  Street name 
•  House number 
•  Zip code 
•  City 
•  Country 
•  Specific directions for delivery (Reception, Warehouse… etc. ) 

Unit information

•   Has the unit been registered using the registration information that was in the unit shipping box?
      (if not, please fill in the form, which can be downloaded from here)
•  Unit information
  •  Model Name
  •  Full Model Number
  •  Serial Number
  •  Mat/N
•  Clear picture of the faulty unit label so that the serial number is visible

Logging Information

•  IPMI information/logs: please refer to the following article 
  • How to remotely view and collect the system's event log through IPMI?

  • IPMI logs are required for/ when, for example:

    • Device does not power up, No video is shown on the Monitor, BIOS issues
      
      

•  Super Doctor logs and print screens: please refer to the following article 
  • How to Collect Support Data of DIP 6000 R2/ 7000 R2 with SuperDoctor 5 (SD5)

  • Super Doctor logs and print screens are required for/ when, for example:

    • Power Supply failure, Unit overheating. Can be requested to see the general health of the unit

Symptom specific Information

•  Detailed problem description

Faulty HDD

•  Picture with the front panel of the unit
  • E.g.:
    
    
    

  • Picture with the front panel of the unit is required for/ when, for example:

    • This is requested in general to see the status of the unit  (LED’s). E.G. Red LED is on next to a faulty HDD, RED LED indicates a power  delivery issue
      
      

•  Picture from the MegaRaid Storage Manager (Dashboard, Physical, Logical)
  • E.g.:
    
    
    

  • Picture from the MegaRaid Storage Manager is required for/ when, for example:

    • HDD failure, RAID controller failure, Windows cant detect the HDD’s, RAID volume issues

•  MegaRaid logs: 
  • How to collect MegaRAID logs for DIVAR IP 6000/7000 R2?

  • MegaRaid logs are required for/ when, for example:

    • HDD failure, RAID controller failure, Windows cant detect the HDD’s
      
      

•  

  LSIget data capture script

  • Run the LsiGet script from your OS and send us the logs for analysis. You can find instructions at the following URL or by accessing: LSIget data capture script.pdf

  • LSIget data capture script Manager is required for/ when, for example:

    • Same as point above with MegaRaid, but is requested only by Central Technical Support team in certain cases for deep investigations

Faulty SSD

•  Picture of the RAID 1 status
  
  • E.g.: Start the unit and press F7 during the BIOS power-on-self-test and afterwards select Raid 1 setup:
    
    

• • 
    
    

  • Picture of the RAID 1 status is required for/ when, for example:

    • Unit can't boot into Windows, one SSD failed, Entire RAID 1 failed

DIVAR IP unit not booting

•  Video with the front of the unit during the boot sequence, where the beep codes are audible and the LEDs on the front of the unit are visible;
•  Video of the screen
•  Information on whether the unit worked before or not

SMC

DIVAR IP unit does not power up

•  Pictures with back LEDs from the power supply
  • E.g.:
    
    
    

  • Pictures 

  Picture

  • with

  the front panel of the unit
  • E.g.:
    Image Removed
•  What is the result if checking with another power cord?

Why does the Central Technical Support team ask for the following information?

• •  back LEDs from the power supply is required for/ when, for example:

    • Power Supply failure, Unit

• • • does not power up

•  Picture with the front panel of the unit

• This is requested in general to see the status of the unit  (LED’s).
  • • E.
  G. Red LED is on next to a faulty HDD, RED LED indicates a power  delivery issue,
• Picture from the MegaRaid Storage Manager is required for/ when, for example:
  • HDD failure, RAID controller failure, Windows cant detect the HDD’s, RAID volume issues
• LSIget data capture script Manager is required for/ when, for example:
  • Same as point 5, but is requested only by Central Technical Support team in certain cases for deep investigations
• Picture of the RAID 1 status is required for/ when, for example:
  • Unit can't boot into Windows, one SSD failed, Entire RAID 1 failed
Pictures with back LEDs from the power supply is required for/ when, for example:Power Supply failure, Unit does not power up
• • g.:
    Image Added
    
    
•  What is the result if checking with another power cord?