No Auto tracking for AutoDome 7000i or MIC IP starlight 7000i in firmware v.7.81

Possible causes and solution(s)

• Causes

When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following.

Auto tracking works and metadata is displayed only on a stored preposition.

• Solution

There was a change introduced starting with FW v.7.70.

The new feature is: i-Track only starts on VCA-Alarm.

You can either program this on presets, e.g a detection field or if you want to have Itrack active regardless of its position, you need to activate "global VCA" and assign task detection area "whole screen"

• now only activate iTrack "AUXON78" so the eye is in the corner, and your iTrack will always be on sharp

Note: IVA must be active for at least one preset scene in the VCA page on the Settings tab.

• If IVA is configured for one scene, then all other scenes have Intelligent Tracking enabled by default. If a scene, however, has Motion+ or IVA 5.5 Flow activated, then Intelligent Tracker is disabled for these scenes.

Please refer also to the following document: How to Demo Bosch Intelligent Tracking.pdf

See more KB articles related to video analytics here.