/
Set the DS9400 and 7024 Series FACP to Factory Default
Set the DS9400 and 7024 Series FACP to Factory Default
- Jeisson.Oliveros (Unlicensed)
- Atlassian Sales
- Tale Fakikj
- Marconi Ana Maria Felicia (Unlicensed)
Owned by Jeisson.Oliveros (Unlicensed)
Last updated: Feb 04, 2025 by Atlassian Sales
Issue
How can the programming on the D7024 be defaulted?
Solution
- Enter program mode by pressing 0/Prog followed by the programmer's PIN (default is 9876).
- Choose option 8 - HSTRY DEFLTS.
- Choose option 2 - DEFAULT EE.
- Press #/Command to confirm.
- When the Default is complete power down the panel for 30 Seconds AC & Battery then reapply power.
Part numbers FPD-7024, D7024, DS9400, DS9400I, DS9400M
, multiple selections available,
Related content
How to Set the DS7090 or DS7090i to Factory Default
How to Set the DS7090 or DS7090i to Factory Default
More like this
Add or Install Mux Devices to DS9400 & 7024 Series FACP
Add or Install Mux Devices to DS9400 & 7024 Series FACP
More like this
Add a Keypad on the D7024, FPD-7024, & DS9400 Series
Add a Keypad on the D7024, FPD-7024, & DS9400 Series
More like this
͏ ͏ Stay up to date |
Get in touch |
You are on |
|---|---|---|
Bosch Building Technologies
|
͏ ͏ Corporate information |
Legal Notice |
Data Protection Notice |
California Privacy |
CCPA-and-Canadian-Privacy-Disclosure |
Terms of use |