Step-by-step guide

Steps to focusing a Box camera:

• Start by opening the Lens Wizard in the Installer Menu

• Set the Back Focus to the Center position
  • By pressing Center Button
    • When the Focus position is finished it will be centered at 500.
  • Set the Zoom manually (Wide to Tele) to customize the image boundaries.
  • Then focus the lens manually
    • By physically adjusting the focus on the lens body.
    • Adjust the manual lens focus as good as physically possible.
  • Finally, press ‘Full Range’ to allow the camera to auto focus for the optimum image focus.

• • • The objective is to have the camera's focus position set near the Focus Position of 500 position.
      
      • If  the focus position is off center like the below image, the camera/lens could have problems focusing from edge to edge.

• • To focus on a specific area
    • Select the area by dragging the Rectangle to shade the specific area that you want to focus.
    • Then press Local Range to focus on the specific area.