Issue
What is the back box for the FMM-7045 pull station?
Solution
The FMM-7045 pull stations mount flush or surface to a standard four-inch square back box with a 3/4" single-gang mud ring so that the total depth of the box is at least 2.25 in. (5.7 cm).
Mounting
The manual stations are for indoor use only.
Notice: If a pull station is needed for outdoor use or in an unheated area, use an FMM‑100 Family Pull Station rated for the environment and wired to a multiplex module within the interior of the building.
The FMM‑7045 manual stations flush or surface mount on a standard four‑inch square back box with a single‑gang mud ring so that the total depth of the box is at least 2.25 in. (5.7 cm).
Notice: These manual stations do not fit an FMM‑100BB‑R Back Box.
Part numbers FMM7045, FMM7045-D, D7024, FPD-7024, DS9400, DS9400I, DS9400M
| Scroll only | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference. This is |