Link to be provided outside of Bosch
Internal document. This article cannot be provided outside of Bosch.
Since VRM 4.10, we have reintroduced the Live & Replay pages in the VRM web GUI.
Please note: there is no PTZ control possible via the VRM web GUI, please use installed SW.
How to disable the Live and Replay page from the VRM web GUI
When you want to restrict Live & Replay to the installed Software like BVMS, Video Security Client, Genetec etc.
Step-by-step guide
There is a possibility to Hide the Live & Replay pages from the Web GUI via by adding a Reg Key (if not specified during the BVMS install/upgrade via command line parameter e.g. <Path>\BVMS_Setup.exe /v"HIDELIVEREPLAYPAGE=1"):
adINLINEInformation below is for CTS, SG, GK reference and must be kept internal only.
If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!
- PATH: "HKLM\Software\Wow6432Node\Bosch\VRM"
- DWORD = HideLiveReplayPage
- Default value Value = 0, set to any non-zero value will disable 1, will hide the Live/Replay page
Please contact CTS / SG or GK team to view this section from draft space, if necessary
- - setting the value to 0 will display the Live/Replay pages (by default the Live/Replay pages are visible)
Scroll only | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference. This is |