Link to be provided outside of Bosch
Internal document. This article cannot be provided outside of Bosch.
How to create a Man-trap in AMS 5.01 software (a walk-through of how to for this task).
Step-by-step guide
Step 1: Select Controller in "DevEdit- [System configuration]"
Step 2: Left-click on Controller and select "New entrance"
Step 3: Select drop-down in "New entrance"
Step 4: Select entrance model "DM 03a Revolving door with entry and exit reader"
Step 5: Select the "Man-trap option (check box)"
Step 7: Repeat steps 1-6 to create the second set of readers for the Man-trap
Step 8: Select the first entrance
Step 9: Select Terminals tab item which will display the both entrances created for the man-trap
Step 10: Select a reader then select additional settings tab
Step 11: Set Access sequence check to option: 3 and repeat for each reader in man-trap
Step 12: Select the Areas icon and create 3 areas that lead into the next area
Step 13: User left click on "Man-trap-Area set number of persons to 1
Step 14: Select first Entrance in the Man-trap and set location to Outside the default and Destination to the Man-Trap area
Step 15: Select second Entrance in the Man-trap and set location to the Man-trap area and the Destination to the Final destination for Man-trap
Link shown below is for the configuration manual showing how to physically wire a Man-Trap beginning on page 97:
Please contact CTS / SG or GK team to view this section from draft space, if necessaryadINLINE
Information below is for CTS, SG, GK reference and must be kept internal only.
If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!
| Scroll only | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference. This is |