Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.




Scroll ignore Scroll ignoreArticle statuskb-articleINLINE

Greenexternal  

Link to be provided outside of Bosch

kb-articleINLINE

Yellowinternal

Internal document. This article cannot be provided outside of Bosch.

Panel controller displays can become de-calibrated, e.g. upon initial power-up followed by unintentional contact with the display or inaccurately touching the crosshairs. 

It becomes noticeable after the panel controller has re-booted and does not respond properly to touch.


Step-by-step guide

To re-calibrate the touch screen simply power down and power up the panel via the power switch on the right-hand side of the panel controller.  

Upon power up, place your finger immediately on the display until the boot menu appears. 


Once the boot menu appears, remove your finger from the display. You now have the option to either “Calibrate touch screen” or “Touch screen for at least 4 seconds to calibrate touch screen” (recommended).


You are now able to re-calibrate the touch screen.

Scroll ignoreadvancedINLINEgreenINLINE

MANDATORY --> after finishing this article, if you wrote advanced content in this section , you must to manually add the "advanced" label  This action is required to indicate that this article contains ADVANCED instructions for CTS/ SG or GK.

DO NOT CHANGE ANYTHING IN THIS SECTION!

advanced section
Please contact CTS / SG or GK team to view this section from draft space, if necessaryadINLINE

IMPORTANT! --> the content itself from here will be not displayed. The content from here will be displayed only when the "ad" label will be set after article creation. Only CTS/ SG or GK are allowed to use "ad" label.

PLEASE do not set "ad" label from beginning. Use it only when you need this info and REMOVE the "ad" label when finished!

Information below is for CTS, SG, GK reference and must be kept internal only.

If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!

DO NOT CHANGE ANYTHING IN THIS SECTION!

This section will not be published externally and / or automatically downloaded in the PDF file!

Type your text/ advanced information here

Please write here the statement/answer/explanation

Add pictures, if necessary





Scroll only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference.

This is  created  

Check for Updateprimaryhttps://community.boschsecurity.com/t5/Bosch-Building-Technologies/ct-p/bt_community