...
Scroll ignore |
---|
Article statuskb-articleINLINE Greenexternal Link to be provided outside of Bosch kb-articleINLINEYellowinternal Internal document. This article cannot be provided outside of Bosch. |
Step-by-step guide
To reset the the FPA-1000 press reset button on the bottom left of the panel next to Relay 1.
You can also reset the panel by cycling power. To cycle power remove both AC and Battery power wait 30 seconds and reapply AC and Battery power to the panel.
...
Image Removed
...
MANDATORY --> after finishing this article, if you wrote advanced content in this section , you must to manually add the "advanced" label This action is required to indicate that this article contains ADVANCED instructions for CTS/ SG or GK.
DO NOT CHANGE ANYTHING IN THIS SECTION!
...
IMPORTANT! --> the content itself from here will be not displayed. The content from here will be displayed only when the "ad" label will be set after article creation. Only CTS/ SG or GK are allowed to use "ad" label.
PLEASE do not set "ad" label from beginning. Use it only when you need this info and REMOVE the "ad" label when finished!
Information below is for CTS, SG, GK reference and must be kept internal only.
If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!
DO NOT CHANGE ANYTHING IN THIS SECTION!
...
Type your text/ advanced information here
Please write here the statement/answer/explanation
...
Scroll only |
---|
scroll-pdf | true |
---|
scroll-office | true |
---|
scroll-chm | true |
---|
scroll-docbook | true |
---|
scroll-eclipsehelp | true |
---|
scroll-epub | true |
---|
scroll-html | true |
---|
|
You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference. This is created Check for Updateprimaryhttps://community.boschsecurity.com/t5/Bosch-Building-Technologies/ct-p/bt_community
|