Scroll ignore |
---|
Tip |
---|
This procedure takes in average ~ 5 min to complete |
Question
Is Blurring Possible on the DINION 7100i IR Camera?
Answer
Yes, the blurring feature is available on the DINION 7100i IR camera, introduced in firmware version 9.10.0192, as noted in the CPP14 Release Notes (page 17).To enable this feature, please upgrade the camera to firmware version 9.10.0192 or later.
Once the DINION 7100i IR camera has been updated to firmware version 9.10.0192 or later, the blurring option can be set from web browser byfollowing these steps:
- Go to Configuration
- Expand theCameramenu
- SelectInstaller Menu
- ChooseOnfor theBlurringoption
Additionally, after completing the above steps, it is necessary to select the Blur Pattern from Privacy Mask in the Installer Menu and click the Set button.
advancedINLINEgreenINLINE
Please contact CTS / SG or GK team to view this section from draft space, if necessaryadINLINE
Information below is for CTS, SG, GK reference and must be kept internal only.
If you are part of CTS, SG or GK team, please hide this section when you have finished using this article!
Scroll only | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference. This is |