Versions Compared

Version Old Version 4 New Version 5
Changes made by

Marconi Ana Maria Felicia (Unlicensed)

Marconi Ana Maria Felicia (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Scroll ignore

Scroll ignore
Article statuskb-articleINLINE

Greenexternal

Link (Put Lithium Link in here) to   to be provided outside of Bosch

kb-articleINLINE

Yellowinternal

Internal document. This article cannot be provided outside of Bosch.

Possible causes and solution(s)

15.5.7  DICENTIS Configuration manual

Issue

Cause:

After upgrading to DICENTIS Conference system 3.60, TLS1.0 is disabled for security reasons, and TLS1.2 is enabled. Since the Multimedia device does not support TLS1.2, it does not show logo and participant images anymore.

Solution:

Enable TLS1.0 on the server:

  1. Open a command prompt in Administrator mode.
  2. Run \Tools\TLS_MMD\EnableTLS1.0.bat from the DICENTIS ISO file.
  3. Powercycle the server.

Note: This directory also contains a file to disable TLS1.0.


Go to the homepage and download the newest software.

https://licensing.boschsecurity.com/software/html/load.htm?1000


Open DCNM.iso file from 3.60 or newer.  (I have renamed it to DCNM_3.61 so that I know which version it is)







  • Run \Tools\TLS_MMD\EnableTLS1.0.bat from the DICENTIS ISO file




Scroll only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

You are using an Offline Version of these Article, please ensure to regularly check the corresponding online article on the Bosch Building Technologies Knowledge Base for any updates. Use the date and version information of the document as reference.

This is  created  

Check for Updateprimaryhttps://community.boschsecurity.com/t5/Bosch-Building-Technologies/ct-p/bt_community